2013, 49:5760. 10.1039/c3cc41913dCrossRef 4. Gupta AK, Gupta M: Biomaterials. 2005, 26:3995–4021. 10.1016/j.biomaterials.2004.10.012CrossRef 5. Granitzer P, Rumpf K, Tian Y, KU-60019 research buy Akkaraju G, Coffer J, Poelt P, Reissner M: Appl Phys Lett. 2013, 102:193110. 10.1063/1.4807421CrossRef 6. Tian Y, Gonzalez R, Akkaraju G, Coffer J: Presentation at Porous Semiconductors Science and Technology. Spain: Alicante-Benedorm; 2014. Abstract 06-O-15 7. Roca AG, Costo R, Rebolledo AF, Veintemillas-Erdaguer S, Tartaj P, Gonzalez Carreno T, Morales MP, Serna CJ: J Phys D: Appl Phys. 2009, 42:224002. 10.1088/0022-3727/42/22/224002CrossRef Competing interests The authors declare that they have no

competing interests. Authors’ contributions RG fabricated the SiNT samples, their loading with Fe3O4 nanoparticles, and microstructural characterization.

PG and KR performed the magnetic measurements. PG, KR, RG, JC, and MR discussed the data and prepared the manuscript. All authors read and approved the final manuscript.”
“Background Over the last decade, there has been an increasing interest in finding new highly efficient thermoelectric materials Cell Cycle inhibitor for electronic cooling [1–3] and power generation [4–6]. The energy demand in developed and under-developed countries is increasing due to the population growth and the improvement of the standard level of life in emerging countries. Unfortunately, reserves of fossil fuels are not unlimited, and their use generates huge amounts of CO 2 in the atmosphere. Many human activities (power plants, cement plants, steel mills, and vehicles engines as a few examples) are generating high amount of waste heat at different ranges of temperature. The conversion of this waste heat into electric energy would be an important contribution to the sustainable development as it would

allow to reduce both the Greenhouse gas emissions and fossil fuel consumption. Thermoelectric generators are designed to convert a temperature difference into electricity (Seebeck effect) or, inversely, electric energy into a thermal Fossariinae gradient (Peltier effect). Thermoelectric materials must have a high conversion efficiency, and they must also be composed conveniently of non-toxic and abundantly available elemental species having high chemical stability in air. The performance of a thermoelectric material is determined by the dimensionless figure of merit ZT: (1) S being the Seebeck coefficient, σ the electrical conductivity, κ the thermal conductivity, and T the absolute temperature. The power factor (PF) defined as PF≡σ S 2 can be used to compare the relative efficiency when the thermal conductivity is similar in different samples. Over the past 30 years, semiconductor alloys based on Bi 2 Te 3, PbTe, and SiGe [7–9] have been extensively studied and optimized for their use in thermoelectric applications.